Autor Tema: The operating principle and internal structure for slip ring  (Leído 1353 veces)

Desconectado slipringcn5

  • PHPerit@
  • *
  • Mensajes: 19
  • Karma: 0
  • Nuev@ PHPer@
    • Ver Perfil
The operating principle and internal structure for slip ring
« en: 28 de Junio de 2015, 09:04:49 am »

If you want to understand the working principle and internal structure of slip ring, what do you need to know firstly? As we all know that, slipring also could be called conductive slip ring, collector ring, rotary joint, rotating electrical connector, industry slip ring, brush block, commutator, adapter and so on. All of these above are special rotating connector and electrical component which specially transfer power and signal for many rotating devices.
 
The slip ring itself actually does not have the rotating function. Slip rings consist of two parts, one is for rotor that could connect the rotating structure in the equipment, another one is for stator which can connect the fix structure in the device. The design structure of rotor and stator are precise overlay of single channel, the circuits for overlay could be customized according to exact technical requirements. During assembling, slip ring supplier can make the circuit of stator side to be one-to-one correspondence with rotor side, which could be formed circuits between rotor and stator. In such case, the electrical performance for each channel can be independent and mutual noninterference.
 
However, the circuit formation between stator and rotor should contact each other. Their contact is the functional location and the carrier of various performance of the total slip ring. Therefore, the contacting materials, suitable design and structure, precise technology all should be the significant factors for superior quality slip ring. Through the both end lead wires of slip ring, it can transmit all kinds of signals as needed under rotating condition.
Related Subject Article:
 
 
   The principle of the slip ring
 
   
 
   What is the through-hole slip ring
Originally authorized reprint since:www.barlintimes.com

Comunidad PHPeros

The operating principle and internal structure for slip ring
« en: 28 de Junio de 2015, 09:04:49 am »